Zebra ZM400 User Manual

Page 49

Advertising
background image

41

Operations

Load Media

3/27/07

ZM400/ZM600 User Guide

79695L-001 Rev. A

6.

7.

Slide in the media guide until it touches the outer edge of the media.

8.

Set the printer to Peel-Off mode. See

Select Print Mode on page 64

for instructions.

9.

Close the printhead assembly.

10.

If the printer is paused (the Pause light is on), press

PAUSE

to enable printing. Peeling and

liner take-up (if used) begin automatically.

Caution • Use the peel release lever and your right hand to close the peel assembly.
Do not use your left hand to assist in closing. The top edge of the peel roller/assembly
could pinch your fingers.

Close the peel assembly using the peel-off mechanism release lever.

Advertising
This manual is related to the following products: