Zebra ZM400 User Manual

Page 84

Advertising
background image

Configuration
Control Panel Parameters

76

79695L-001 Rev. A

ZM400/ZM600 User Guide

3/27/07

Set Data Bits
This setting applies only when the serial port is used. The data bits of the
printer must match the data bits of the host computer for accurate
communications to take place. Set the data bits to match the setting being
used by the host computer.

Default Value: 8 BITS

Selections: 7 BITS, 8 BITS

To change the value shown:

1.

Press

SELECT

to select the parameter.

2.

Press

PLUS (+)

or

MINUS (-)

to toggle between the options.

3.

Press

SELECT

to accept any changes and deselect the parameter.

Set Parity
This setting applies only when the serial port is used. The parity of the
printer must match the parity of the host computer for accurate
communications to take place. Select the parity that matches the one being
used by the host computer.

Default Value: NONE

Selections: EVEN, ODD, NONE

To change the value shown:

1.

Press

SELECT

to select the parameter.

2.

Press

PLUS (+)

or

MINUS (-)

to scroll through the options.

3.

Press

SELECT

to accept any changes and deselect the parameter.

Set Host Handshake
This setting applies only when the serial port is used. The handshake
protocol of the printer must match the handshake protocol of the host
computer for communication to take place. Select the handshake protocol
that matches the one being used by the host computer.

Default Value (ZPL, XML): XON/XOFF

Selections (ZPL, XML):XON/XOFF, DSR/DTR, RTS/CTS

Default Value (EPL): DTR & XON/XOFF

Selections (EPL): DTR & XON/XOFF, DTR

To change the value shown:

1.

Press

SELECT

to select the parameter.

2.

Press

PLUS (+)

or

MINUS (-)

to scroll through the options.

3.

Press

SELECT

to accept any changes and deselect the parameter.

Table 12 • Printer Parameters (Page 15 of 24)

Parameter

Action/Explanation

Advertising
This manual is related to the following products: