Xerox Phaser 3635 - Manual (Page 16)

1 Welcome
10 Xerox Phaser 3635 User Guide
Standard: UL60950-1, 2003 Edition. Certification is based on reciprocity
agreements, which include requirements for Canada.
Laser Safety Information
CAUTION: Use of controls, adjustments or performance of procedure other
than those specified herein may result in hazardous light exposure.
With specific regard to laser safety, the equipment complies with performance
standards for laser product set by government, national and international
agencies as a Class 1 laser product. It does not emit hazardous light, as the beam
is totally enclosed during all phases of customer operation and maintenance.
WARNING: Do not stare into the light source if the platen cover is in the up
position.
Ozone Safety Information
This product will produce ozone during normal operation. The ozone produced is
heavier than air and is dependent on copy volume. Providing the correct
environmental parameters as specified in the Xerox installation procedure will
ensure that the concentration levels meet safe limits.
If you need additional information about ozone, please request the Xerox
publication Ozone by calling 1-800-828-6571 in the United States and Canada. In
other markets please contact your authorised local dealer or Service Provider.
For Consumables
• Store all consumables in accordance with the instructions given on the package
or container.
• Keep all consumables away from the reach of children.
• Never throw Print Cartridges or toner containers into an open flame.
• Cartridges: When handling cartridges, for example ink, fuser, etc., avoid skin or
eye contact. Eye contact can cause irritation and inflammation. Do not attempt
to disassemble the cartridge. This can increase the risk of skin or eye contact.
Product Safety Certification
This product is certified by the following Agency using the Safety standards listed.
Agency Standard
Underwriters Laboratories Inc UL60950-1 1st (2003) (USA/Canada)
Intertek ETL SEMKO IEC60950-1 Edition 1 (2001)