Xerox Phaser 3635 - Manual (Page 209)

12 Maintenance
Xerox Phaser 3635 User Guide 203
Cleaning the Machine
WARNING: When cleaning your machine DO NOT use organic or strong
chemical solvents or aerosol cleaners. DO NOT pour fluids directly onto any
area. Use supplies and cleaning materials only as directed in this
documentation. Keep all cleaning materials out of the reach of children.
WARNING: DO NOT use pressurised air-spray cleaning aids on or in this
equipment. Some pressurised air-spray containers contain explosive mixtures
and are not suitable for use in electrical applications. Use of such cleaners can
result in a risk of explosion and fire.
CAUTION: DO NOT remove the covers or guards that are fastened with screws.
You cannot maintain or service any of the parts that are behind these covers
and guards. DO NOT attempt any maintenance procedure that is NOT
specifically described in the documentation supplied with your machine.
Document Glass and Constant Velocity Transport (CVT) Glass
1. Use a soft, lint-free cloth, lightly
dampened with water. Liquid
should never be poured directly
onto the glass.
2. Wipe clean the entire glass
area.
3. Wipe away any residue with a
clean cloth or paper towel.
NOTE: Spots or marks on the glass
will be reproduced on the prints when copying from the document glass. Spots on
the Constant Velocity Transport Glass will show up as streaks on the prints when
copying from the document feeder.
The Control Panel and Touch Screen
Regular cleaning keeps the touch screen and control panel free from dust and dirt.
To remove finger prints and smudges, clean the touch screen and control panel as
below:
1. Use a soft, lint-free cloth, lightly dampened with water.
2. Wipe clean the entire area, including the touch screen.
3. Remove any residue with a clean cloth or paper towel.
Document
glass
CVT glass