Set measurements, Set default paper size – Xerox Phaser 3635 User Manual
Page 178
Advertising
11
Setups
172
Xerox Phaser 3635 User Guide
Tools > Device Settings > General > GMT Offset
Set Measurements
The measurements that are displayed on the touch screen can be set to either
inches or mm. You can also set the decimal point (Numeric Separator) to either a
period (e.g. 12.3) or a comma (e.g. 12,3).
Tools > User Interface > General > Measurements
Set Default Paper Size
The Default Paper Size settings allows the programming of the default paper size.
Set the default size to either 8.5 x 11" (refers to Letter and Legal sizes) or A4 (297
x 210mm).
Advertising