ZyXEL Communications ZyXEL Dimension GS-4012F - Manual (Page 256)

GS-4012F/4024 User’s Guide
Chapter 40 Introducing the Commands 255
learn inactive Disables MAC address learning
on the specified port(s).
address-limit
<number>
Limits the number of (dynamic)
MAC addresses that may be
learned on a port.
queue level <0-7> priority
<0-7>
Sets the priority level-to-
physical queue mapping.
radius-server host <ip> [acct-port
<socket-number>]
[key <key-string>]
Sets the IP address of the
external RADIUS server, UDP
port and shared key.
remote-
management
<index> start-addr
<ip> end-addr <ip>
service
<telnet|ftp|http|
icmp|snmp>
Specifies a group of trusted
computer(s) from which an
administrator may use a service
to manage the switch.
router dvmrp Enables and enters the DVMRP
configuration mode.
exit Leaves the DVMRP
configuration mode.
threshold <ttl-
value>
Sets the DVMRP threshold
value.
igmp Enables and enters the IGMP
configuration mode.
exit Leaves the IGMP configuration
mode.
ospf <router-id> Enables and enters the OSPF
configuration mode.
area <area-id> Enables and sets the area ID.
area <area-id>
authentication
Enables simple authentication
for the area.
area <area-id>
authentication
message-digest
Enables MD5 authentication for
the area.
area <area-id>
default-cost <0-
65535>
Sets the cost to the area.
area <area-id>
name <name>
Sets a descriptive name for the
area for identification purposes.
area <area-id>
stub
Enables and sets the area as a
stub area.
area <area-id>
stub no-summary
Sets the stub area not to send
any LSA (Link State
Advertisement).
area <area-id>
virtual-link
<router-id>
Sets the virtual link ID
information for the area.
Table 95 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION