ZyXEL Communications ZyXEL Dimension GS-4012F User Manual
Page 83
GS-4012F/4024 User’s Guide
82
Chapter 7 Basic Setting
802.1P Priority This priority value is added to incoming frames without a (802.1p) priority queue tag.
See Priority Queue Assignment in
for more information.
BPDU Control
Configure the way to treat BPDUs received on this port. You must activate bridging
control protocol transparency in the Switch Setup screen first.
Select Peer to process any BPDU (Bridge Protocol Data Units) received on this port.
Select Tunnel to forward BPDUs received on this port.
Select Discard to drop any BPDU received on this port.
Select Network to process a BPDU with no VLAN tag and forward a tagged BPDU.
Apply
Click Apply to save the settings.
Cancel
Click Cancel to reset the fields to your previous configuration.
Table 12 Port Setup (continued)
LABEL
DESCRIPTION