ZyXEL Communications ZyXEL Dimension GS-4012F - Manual (Page 265)

GS-4012F/4024 User’s Guide
264 Chapter 40 Introducing the Commands
40.9.6 config-vlan Commands
The following table lists the vlan commands in configuration mode.
rip direction
<Outgoing|In>
Sets the RIP direction in this routing domain.
vrrp authentication-
key <k>
Sets the VRRP authentication key in the
routing domain.
no ip dvmrp Disables DVMRP in this routing domain.
ip igmp Disables IP IGMP in this routing domain.
ip ospf
authentication-key
Disables OSPF authentication key settings in
this routing domain.
ip ospf
authentication-sama
Sets the routing domain not to use the same
OSPF authentication settings as the area.
ip ospf cost Disables the OSPF cost in the routing domain.
ip ospf message-
digest-key
Sets the routing domain not to use a security
key in OSPF.
ip vrrp
authentication-key
Resets the VRRP authentication settings.
Table 97 interface route-domain Commands (continued)
COMMAND DESCRIPTION
Table 98 Command Summary: config-vlan Commands
COMMAND DESCRIPTION
vlan <1-4094> Creates a new VLAN group.
exit Leaves the VLAN configuration mode.
fixed <port-list> Specifies the port(s) to be a permanent
member of this VLAN group.
forbidden <port-
list>
Specifies the port(s) you want to
prohibit from joining this VLAN group.
help Displays a list of available VLAN
commands.
inactive Disables the specified VLAN.
ip address <ip-address>
<mask>
Sets the IP address of the switch in the
VLAN.
<ip-address>
<mask> manageable
Sets the IP address of the switch in the
VLAN and allow remote management
to this IP address.
default gateway
<ip-address>
Sets the default gateway IP address in
this VLAN.
name <name-str> Specifies a name for identification
purposes.
no fixed <port-list> Sets fixed port(s) to normal port(s).