ZyXEL Communications ZyXEL Dimension GS-4012F - Manual (Page 266)

GS-4012F/4024 User’s Guide
Chapter 40 Introducing the Commands 265
40.10 mvr Commands
The following table lists the mvr commands in configuration mode.
forbidden <port-
list>
Sets forbidden port(s) to normal
port(s).
inactive Enables the specified VLAN.
ip address <ip-
address> <mask>
Deletes the IP address and subnet
mask from this VLAN.
ip address
default-gateway
Deletes the default gateway from this
VLAN.
untagged <port-
list>
Specifies the port(s) you want to tag all
outgoing frames transmitted with this
VLAN Group ID.
normal <port-
list>
Specifies the port(s) to dynamically join
this VLAN group using GVRP
untagged <port-
list>
Specifies the port(s) you don’t want to
tag all outgoing frames transmitted
with this VLAN Group ID.
Table 98 Command Summary: config-vlan Commands (continued)
COMMAND DESCRIPTION
Table 99 Command Summary: mvr Commands
COMMAND DESCRIPTION
mvr <1-4094> Enters the MVR (Multicast VLAN
Registration) configuration mode.
exit Exist from the MVR configuration
mode.
group <name-str>
start-address
<ip> end-address
<ip>
Sets the multicast group range for the
MVR.
inactive Disables MVR settings.
mode <dynamic|
compatible>
Sets the MVR mode (dynamic or
compatible).
name <name-str> Sets the MVR name for identification
purposes.
no group Disables all MVR group settings.
group <name-str> Disables the specified MVR group
setting.
inactive Enables MVR.
receiver-port
<port-list>
Disables the receiver port(s).An MVR
receiver port can only receive multicast
traffic in a multicast VLAN.