ZyXEL Communications ZyXEL Dimension GS-4012F User Manual
Page 260
GS-4012F/4024 User’s Guide
Chapter 40 Introducing the Commands
259
priority <0-61440>
Sets the bridge priority of the
switch.
ssh known-hosts
<host-
ip> <1024|ssh-
rsa|ssh-dsa> <key>
Adds a remote host to which the
switch can access using SSH
service.
storm-control
Enables broadcast storm
control on the switch.
time
<Hour:Min:Sec>
Sets the time in hour, minute
and second format.
date <month/day/
year>
Sets the date in year, month
and day format.
help
Displays help information.
timezone <-
1200|...|1200>
Selects the time difference
between UTC (formerly known
as GMT) and your time zone.
timesync
<daytime|time|ntp>
Sets the time server protocol.
server <ip>
Sets the IP address of your time
server.
trunk
<T1|T2|T3|T4|T5|T6>
Activates a trunk group.
<T1|T2|T3|T4|T5|T6>l
acp
Enables LACP for a trunk
group.
<T1|T2|T3|T4|T5|T6>i
nterface <port-list>
Adds a port(s) to the specified
trunk group.
interface <port-
list> timeout <lacp-
timeout>
Defines the port number and
LACP timeout period.
vlan
<1-4094>
Enters the VLAN configuration
mode. See
for more information.
vlan1q gvrp
Enables GVRP.
port-isolation
Enables port-isolation.
vlan-stacking
Enables VLAN stacking on the
switch.
<SPTPID>
Sets the SP TPID (Service
Provider Tag Protocol Identifier).
vlan-type
<802.1q|port-based>
Specifies the VLAN type.
Table 95 Command Summary: Configuration Mode (continued)
COMMAND
DESCRIPTION