Xantrex Technology XW POWER SYSTEM XW4024-120/240-60 - Manual (Page 108)

XW System Accessories Installation
5–16 975-0239-01-01
Connecting the Wiring Harness to the XW Automatic Generator Start
After all the external connections have been wired to the wiring harness, the connector on
the wiring harness must be plugged into the 20-contact connector on the XW Automatic
Generator Start.
To connect the wiring harness to the XW Automatic Generator Start:
◆ With the click-tab on the wiring harness connector on top (away from the mounting
surface), insert the wiring harness connector into the 20-contact connector on the XW
Automatic Generator Start until the tab clicks into place.
Figure 5-11 XW Automatic Generator Start External Connections
Wiring harness (connection to
generator, thermostats, and
external switches)
20-contact
connector
Click Tab