ZyXEL Communications MES-2110 - Manual (Page 193)

Chapter 23 Command Line Interface
MES-2110 User’s Guide
193
23.7.1 IGMP Snooping Example
This example enables IGMP snooping, then sets the query mode to “Auto” and
port #10 to static.
.
sntp daylightsavingstart <mo.dd>
Sets the daylight savings time start date for the
specified month (mo) and day (dd).
sntp daylightsavingend <mo.dd>
Sets the daylight savings time end date for the
specified month (mo) and day (dd).
sntp daylightsaving <enable | disable>
Enables or disables daylight savings time.
spanning-tree enable
Enables RSTP.
spanning-tree forward-delay <4-30>
Sets the RSTP forward delay. The default is 15.
spanning-tree hello-time <1-10>
Sets the RSTP hello time. The default is 2.
spanning-tree maximum-age <6-40>
Sets the RSTP maximum age. The default is 20.
spanning-tree priority <0-61440>
Sets the RSTP switch priority the default is
32768.
syslog enable
Enables syslog support.
syslog disable
Disables syslog support.
syslog clear
Clears all data out of the syslog.
system-name <string>
Sets the system name to the specified string.
string
: Enter up to 30 characters.
vlan-stacking
Enables VLAN stacking on the device.
vlan-type <802.1q | port-base>
Configures VLAN type.
Table 80 Configuration Mode Commands
COMMAND DESCRIPTION
MES-2110(config)# igmp snooping
MES-2110(config)# igmp query-mode auto
MES-2110(config)# igmp static 10