ZyXEL Communications MES-2110 - Manual (Page 207)

MES-2110 User’s Guide
207
C
H A P T E R
2 4
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories.
• Power, Hardware Connections, and LEDs
• MES-2110 Access and Login
• MES-2110 Configuration and Console
24.1 Power, Hardware Connections, and LEDs
The MES-2110 does not turn on. None of the LEDs turn on.
1
Make sure you are using the power adaptor or cord included with the MES-2110.
2
Make sure the power adaptor or cord is connected to the MES-2110 and plugged
in to an appropriate power source. Make sure the power source is turned on.
3
Disconnect and re-connect the power adaptor or cord to the MES-2110.
4
If the problem continues, contact the vendor.
The ALM LED is on.
1
Disconnect and re-connect the power adaptor or cord to the MES-2110.
2
If the problem continues, contact the vendor.