ZyXEL Communications ES-2024 Series - Manual (Page 120)

Chapter 15 Link Aggregation
ES-2024 Series User’s Guide
120
Figure 55 Trunking Example - Physical Connections
2 Configure static trunking - Click Advanced Application > Link Aggregation > Link
Aggregation Setting. In this screen activate trunking group T1 and select the ports that
should belong to this group as shown in the figure below. Click Apply when you are
done.
Figure 56 Trunking Example - Configuration Screen
Your trunk group 1 (T1) configuration is now complete; you do not need to go to any
additional screens.
A
B