Figure 24 status: port details, Table 7 status > port details – ZyXEL Communications ES-2024 Series User Manual
Page 61
Chapter 6 System Status and Port Statistics
ES-2024 Series User’s Guide
61
Figure 24 Status: Port Details
The following table describes the labels in this screen.
Table 7 Status > Port Details
LABEL
DESCRIPTION
Port Info
Port NO.
This field displays the port number you are viewing.
Name
This field displays the name of the port.
Link
This field displays the speed (either 10M for 10Mbps, 100M for 100Mbps or 1000M for
1000Mbps) and the duplex (F for full duplex or H for half duplex). It also shows the
cable type (Copper or Fiber).
Status
If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port
for more information).
If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it
displays STOP.
PD
PowerCon
sumption
This field is available for the PWR model only.
This field displays the current amount of power consumed by devices (powered
devices, or PD) that use Power over Ethernet (PoE) to get power from the Switch on
this port.
PD
MaxCurre
nt
This field is available for the PWR model only.
This field displays the maximum amount of current drawn by devices (powered
devices, or PD) that use Power over Ethernet (PoE) to get power from the Switch on
this port.