ZyXEL Communications ES-2024 Series - Manual (Page 66)

Chapter 7 Basic Setting
ES-2024 Series User’s Guide
66
Figure 25 Basic Setting > System Info
The following table describes the labels in this screen.
Table 8 Basic Setting > System Info
LABEL DESCRIPTION
System Name This field displays the descriptive name of the Switch for identification purposes.
ZyNOS F/W
Version
This field displays the version number of the Switch's current firmware including the
date created.
Ethernet
Address
This field refers to the Ethernet MAC (Media Access Control) address of the Switch.
PoE Status (This section is available for the PWR model only.)
Total Power This field displays the total power the Switch can provide to the connected PoE-
enabled devices on the PoE ports.
Consuming
Power
This field displays the amount of power the Switch is currently supplying to the
connected PoE-enabled devices.
Allocated
Power
This field displays the total amount of power the Switch has reserved for PoE after
negotiating with the connected PoE device(s).
Remaining
Power
This field displays the amount of power the Switch can still provide for PoE.
Note: The Switch must have at least 16 W of remaining power in order
to supply power to a PoE device; even if the PoE device
requested for a lower power supply than 16W.
Hardware Monitor
Temperature
Unit
The Switch has temperature sensors that are capable of detecting and reporting if the
temperature rises above the threshold. You may choose the temperature unit
(Centigrade or Fahrenheit) in this field.
Temperature MAC, CPU and LOCAL refer to the location of the temperature sensors on the Switch
printed circuit board.