ZyXEL Communications ES-2024 Series - Manual (Page 162)

Chapter 21 IP Source Guard
ES-2024 Series User’s Guide
162
Figure 82 IP Source Guard Static Binding
The following table describes the labels in this screen.
Table 56 IP Source Guard Static Binding
LABEL DESCRIPTION
MAC Address Enter the source MAC address in the binding.
IP Address Enter the IP address assigned to the MAC address in the binding.
VLAN Enter the source VLAN ID in the binding.
Port Specify the port(s) in the binding. If this binding has one port, select the
first radio button and enter the port number in the field to the right. If this
binding applies to all ports, select Any.
Add Click this to create the specified static binding or to update an existing one.
Cancel Click this to reset the values above based on the last selected static
binding or, if not applicable, to clear the fields above.
Clear Click this to clear the fields above.
Index This field displays a sequential number for each binding.
MAC Address This field displays the source MAC address in the binding.
IP Address This field displays the IP address assigned to the MAC address in the
binding.
Lease This field displays how long the binding is valid.
Type This field displays how the Switch learned the binding.
static: This binding was learned from information provided manually by an
administrator.
VLAN This field displays the source VLAN ID in the binding.
Port This field displays the port number in the binding. If this field is blank, the
binding applies to all ports.
Delete Select this, and click Delete to remove the specified entry.
Cancel Click this to clear the Delete check boxes above.