Xerox 785 - Manual (Page 109)

Dialing Methods
WorkCentre Pro 665/685/765/785 4-9
The machine dials the number, confirms the connection, and sends
the document.
Automatic Redialing*
When the line of the party you are calling is busy, the machine
automatically redials the number according to the redial interval
selected.
If the line is not connected after the redial attempts, the machine goes
into a Transmission Error mode, and you must repeat the
transmission procedure.
If the Resend Stored Fax feature is active, the documents are
retained in memory and can be resent (see Chapter 8, “Resend
Stored Fax Setting”.)
Manual Redial Last Number (Off-hook)
This redial function enables you to transmit a document to the party of
the number last dialed by the operator using the machine.
To redial the last number, a fax number must be stored for resend or
you must load a document:
1. Pick up the handset, if available, or press:
2. Press Redial key. The display indicates the last number dialed.
Hint: To change the redial settings, press:
(See Chapter 2, “Redial Count and Interval Default Setting”.)
Menu
Manual
Dial
Dial fax number
Fax number: