Xerox 785 - Manual (Page 64)

Programming the Machine
2-44 WorkCentre Pro 665/685/765/785
3. Using the Numeric Keypad, enter the number of minutes you want
the machine to wait before redialing, then press Enter. You must
use a leading 0.
4. The menu selection screen redisplays. If you selected ,
press Exit or Stop to return to the Standby Mode, or enter 06 to
go to redials screen again.
5. If you selected , use the Numeric Keypad to enter the
number of times you want the machine to redial the number, then
press Enter. Must use leading 0.
6. The menu selection screen redisplays. Press Exit or Stop to
return to the Standby Mode, or enter 06 to go to redials screen
again.
Redials
Interval (01-15) min.
01
Redials
Redials: (00-14):
01