Default factory settings, How to login your zmax-8210 via web browser, Chapter 3 basic settings – Z-Com ZMAX-8210-I User Manual
Page 14: Efault, Actory, Ettings, Ow to, Ogin, Zmax-8210, Rowser
Basic Settings
Chapter 3 Basic Settings
Default Factory Settings
We’ll elaborate the ZMAX-8210 default factory settings. You can re-acquire these parameters by resort
button. If necessary, please refer to the “the way to restore default factory settings.
Table 1 ZMAX-8210 Default Factory Settings
Feature
Factory Default Settings
User Name
admin
Password password
Device Name
Devicexxxxxx（xxxxxx represents the last 6 digits of
MAC address）
Spanning Tree Protocol
Enable
IP Type：STATIC
IP Address：192.168.1.1
Subnet Mask：255.255.255.0
Default Gateway：0.0.0.0
IP Settings
Primary/Second DNS Server：0.0.0.0
HTTP Redirect
Disable
Base Station ID：01020304050D
Dual-Direction Voice：TDD
Bandwidth：7MHz
Encryption：Disable
Wireless Settings
IR Bit: 0
SSH Disable
SNMP：Enable
Trap Server：192.168.0.254
Read Community：public
SNMP
Write Community：private
How to Login Your ZMAX-8210 via WEB Browser
ZMAX -8210 provides you with user-friendly web-based management. Take the following steps
Enter the ZMAX-8210 via IE. When entering the IP ad
, you’ll see a popup
menu below:
Chapter 3
- 8 -