Z-Com ZMAX-8210-I - Manual (Page 16)

Figure 7 ZMAX-8210 General Information
Device Name
Clicking“Basic Settings” ，you’ll see the ZMAX-8210Name. You may assign any device name to this
CPE. This name is only used by the CPE administrator for identification purposes. Unique, memorable
names are helpful, especially if you are employing multiple access points on the same network. This
name is composed of 15 characters with 0-9, A-Z, a-z or “-“.
Figure 8 ZMAX-8210 CPE Name
“WINS” enabled, you have the alternative of entering management page by entering the Device name
instead of painfully writing out IP Address. For example, you can specify the name as “device030201”.
So entering“device030201” will lead you to the management site. Also, Ping device030201 helps you
check whether WINS can take effective in the ZMAX-8210.
Note：
Chapter 3 Basic Settings - 10 -