Z-Com ZMAX-8210-I - Manual (Page 35)

Figure 30 ZMAX-8210 Wireless Network Connection Properties
Q 5. In what way to restore my ZMAX-8210 to the factory default settings?
Refer to Restore Factory Default Settings.
Q 6. How to re-gain my ZMAX-8210 password if it slips off my mind？
Refer to Restore Factory Default Settings.
Q 7. How I could know my PC has connected to the ZMAX-8210?
• Click“Start”>“Run”
• Enter “cmd”
• Enter “ping 192.168.1.1”, use “ping” to check whether the tie has been established between
your ZMAX-8210 and PC
• If the tie has been established, it will be shown as below.
Chapter 6 Troubleshooting - 29 -