Xantrex Technology 1000 - Manual (Page 6)

v
Important Safety Instructions
1. Before installing and using the XPower Inverter 1000, read all
instructions and cautionary markings on the XPower Inverter 1000,
the batteries, and all appropriate sections of this guide.
2. Do not expose the XPower Inverter 1000 to rain, snow, spray, or bilge
water. To reduce risk of fire hazard, do not cover or obstruct the
ventilation openings. Do not install the XPower Inverter 1000 in a
zero-clearance compartment. Overheating may result.
3. Use only attachments recommended or sold by the manufacturer.
Doing otherwise may result in a risk of fire, electric shock, or injury
to persons.
4. To avoid a risk of fire and electric shock, make sure that existing
wiring is in good condition and that wire is not undersized. Do not
operate the XPower Inverter 1000 with damaged or substandard
wiring.
5. Do not operate the XPower Inverter 1000 if it has received a sharp
blow, been dropped, or otherwise damaged in any way. If the XPower
Inverter 1000 is damaged, see the Warranty section.
6. Do not disassemble the XPower Inverter 1000. It contains no user-
serviceable parts. See Warranty for instructions on obtaining service.
Attempting to service the XPower Inverter 1000 yourself may result
in a risk of electrical shock or fire. Internal capacitors remain charged
after all power is disconnected.
7. To reduce the risk of electrical shock, disconnect both AC and DC
power from the XPower Inverter 1000 before attempting any
maintenance or cleaning or working on any circuits connected to the
XPower Inverter 1000. Turning off controls will not reduce this risk.
8. The XPower Inverter 1000 must be provided with an equipment-
grounding conductor connected to the AC input ground.
WARNING
This chapter contains important safety and operating instructions. Read and keep
this Owner’s Guide for future reference.