Registering ownership of your officeconnect remote, Pre-installation requirements, Registering ownership of your officeconnect – 3Com 520 User Manual
Page 19: Remote 1-5, Pre-installation requirements 1-5
Introduction
1-5
Registering Ownership Of Your OfficeConnect
Remote
A
warranty
registration card is enclosed in the box
with your OfficeConnect Remote. Please take a few
moments before commencing the installation to fill
in the card and post it to us.
Pre-installation Requirements
Before you install your OfficeConnect Remote you
will need the following:
■
A suitable cable for connection to your LAN (or
workstation if only a single workstation is attached to
this unit).
Although the OfficeConnect Remote has two LAN
connections (10Base2 and 10BaseT), only one port
can be used at a time.
■
A standard ISDN line wall socket to connect the
ISDN cable to the ISDN port of the OfficeConnect
Remote. If a suitably sited wall socket is not already
available, then contact your telecommunications
supplier for assistance.
■
A suitable cable to connect to your ISDN socket.
A 1.5 meter ISDN cable is supplied with this unit.
■
The ISDN telephone number of the remote ISDN
unit in order to carry out the connection
configuration procedure.
■
A suitable WAN cable if you are connecting to the
remote site over a leased line.
Rc.bk : RC01.FRM Page 5 Thursday, July 10, 1997 9:53 AM