Network topology, Broadcast storms, Optimum use of resource – 3Com 520 User Manual

Page 60: Network topology a-6, Broadcast storms a-6, Optimum use of resource a-6

Advertising
background image

A-6

B

R

I

D

G

I

N

G

A

N

D

R

O

U

T

I

N

G

Network Topology

If your network topology is star shaped, a

combination of ISDN and bridging is usually the

most efficient and successful option. Routing is a

better solution if your network topology is a complex

mix of both leased line and ISDN circuits, running at

64 Kbps to 2 Mbps.

Broadcast Storms

Bridges are programmed to automatically forward

data packets by default while routers filter data

packets by default. These attributes have an impact

on the overall flow of data across the network. Much

has been made of

broadcast storms

in connection

with bridged networks, where the broadcast signals

from bridges propagate to fill all of the wide area

bandwidth, and bring the network down. Broadcast

storms cannot be attributed to installation of

bridges or routers, but by poor protocol

implementation and network design. However the

deployment of routers can effectively

firewall

one

logical network from another.

Optimum Use of Resource

Bridged networks use Spanning Tree Protocol (STP)

to provide network resilience, by retaining redundant

links on stand-by, in case the primary link fails. This

means that you are not making maximum use of

available resources.

Routing protocols make each node aware of the

primary and alternate routes available, ensuring that

resources (particularly WAN links) are not wasted.

Routers have been designed to provide the optimum

route through the network from the workstation

through to the destination resource with which the

user wishes to communicate. In a very large network

there could be multiple paths available, and these

could change as dedicated links go in or out of

service. These changes in network topology are

handled by routing protocols. However, when using

the ISDN the source network can dial direct to the

destination network, and establish a point-to-point

bridged or routed connection. Generally, when

using this type of ISDN dial-up link, routing does not

provide much extra benefit.

Rc.bk : RCAPPA.FRM Page 6 Thursday, July 10, 1997 9:53 AM

Advertising
This manual is related to the following products:

530, 510