3Com 520 - Manual (Page 23)

Introduction 1-9
Rear Panel
Figure 1-2 OfficeConnect Remote Rear Panel Feature s
POWER Only use the power adapter supplied with
the OfficeConnect Remote to connect to the mains
power supply. Do not use any other adapter with this
unit. If the plug on the power adapter does not
match the mains inlet socket, contact your reseller
for further advice.
RESET For Technical Support use only.
SERIAL The Serial Manager port enables a
management PC or terminal to be connected to the
OfficeConnect Remote using the 9-pin V.24 Serial
Manager cable supplied with the unit. The port
provides VT100 terminal emulation, running at 9600
bps. Refer to Appendix B for more information about
cables.
You also need a proprietary communications
software package such as Windows ‘Terminal’ to
communicate with the OfficeConnect Remote.
Rc.bk : RC01.FRM Page 9 Thursday, July 10, 1997 9:53 AM