3Com V7111 - Manual (Page 36)

ƒ Click Quick Setup ; you’re returned to the ‘Quick Setup’ screen.
7 Click the Reset button and click OK in the prompt; the V7111 applies the changes and
restarts. This takes approximately 2 minutes to complete. When the V7111 has finished
restarting, the Power and Ready LEDs on the front panel are lit green.
Configuring Basic SIP Parameters
Accessing the Embedded Web Server After accessing the Embedded Web Server (see ) the
SIP ‘Quick Setup’ screen is displayed, shown in Figure 21 .
Figure 21 V7111 SIP Quick Setup Screen
36 3Com VCX V7111 Analog Gateway Installation Guide