3Com V7111 - Manual (Page 54)

Figure 33 Auxiliary Files Screen (MGCP Gateways)
To save the loaded auxiliary files to flash memory, follow these 2 steps:
1 Click the Save Configuration button on the main menu bar; the ‘Save Configuration to
the Flash Memory’ screen is displayed.
Saving an auxiliary file to flash memory may disrupt traffic on the device. To
avoid this, disable all traffic on the device before saving to flash memory.
2 Click the Save Configuration button in the middle of the screen; a confirmation
message appears when the save is complete.
A device reset is required to activate a loaded CPT file, and may be required
for the activation of certain
ini file parameters.
54 3Com VCX V7111 Analog Gateway Installation Guide