3Com WL-603 - Manual (Page 143)

Power Adapter 141
4 Using the Web browser on the computer, enter the following URL in the
location bar:
http://192.168.1.1 .
This will connect you to the Recovery utility in the Router.
5 Follow the on-screen instructions. Enter the path and file name of the
software image file.
6 When the upload has completed, the Router will restart, run the self-test
and, if successful, resume normal operation.
7 Refer to the Installation Guide to reconnect your Router to the telephone
line and the computers in your network. Do not forget to reconfigure the
computer you used for the software upload.
If the Router does not resume normal operation following the upload, it
may be faulty. Contact your supplier for advice.
Power Adapter Power Status Logo not lit.
This is probably because the Router does not have power. Check the
following:
■
Make sure the power lead from the power adapter is properly
connected and the cord is not damaged.
■
Ensure the power adapter is correctly fitted into the power outlet
socket and that the socket switch is turned on if applicable.
■
Ensure you are using only the 3Com power adapter supplied with the
Router.
If there is still no power, contact 3Com Technical Support for assistance.
Caution: Only use the power adapter supplied with the Router or a
replacement 3Com power adapter. Do not use any other power adapter.