3Com WL-603 - Manual (Page 53)

Accessing the Setup Wizard 51
WPA with Radius Server
WPA (Wi-Fi Protected Access) provides dynamic key changes and
constitutes the best security solution. This function requires that a
RADIUS server is running on the network.
Figure 38 WPA with Radius Server Screen
1 Select WPA with RADIUS server from the Security Mode drop-down
menu.
2 Select WPA mode from the drop-down menu, three modes are
supported: WPA, WPA2, and Mixed mode.
3 Select Encryption technique from the drop-down menu, four options are
available: TKIP, AES, Auto for WPA AES for WPA2, and AES for both WPA
and WPA2.
WPA supports TKIP and AES Encryption technique, for some old module
of wireless client cards, they may only support TKIP. In this case, we
suggest you to select “AUTO for WPA, AES for WPA2”. If your wireless
client cards can support AES over WPA, we suggest you directly select
“AES for both WPA and WPA2”.
4 Enter the IP address of the RADIUS server on your network into the
RADIUS Server field.
5 Enter the Radius Port number that the RADIUS server is operating on.
6 Enter the key for the RADIUS server in the Radius Key field.
7 By default, the WPA keys are changed every hour, but if you want to
change this setting, you can do so by specifying the rotation time in the
Re-key Interval field.
8 Click Next.