3Com WL-603 - Manual (Page 56)

54 C HAPTER 5: C ONFIGURING THE R OUTER
LAN Settings Your Router is equipped with a DHCP server that will automatically assign
IP addresses to each computer on your network. The factory default
settings for the DHCP server will work with most applications. If you need
to make changes to the settings, you can do so.
The LAN settings screen allows you to:
■ Change the default IP address of the Router. The default IP is
192.168.1.1
■
Change the Subnet Mask. The default setting is 255.255.255.0
■
Enable/Disable the DHCP Server Function. The default is: Enable.
■
Specify the Starting and Ending IP Pool address. The default is
Starting: 2 / Ending: 254.
■
Specify the IP address Lease Time. The default is One day.
■
Specify a local Domain Name. This field is optional.
■
Specify the IP address of 3Com NBX call processor.
The Router will also provide a list of all client computers connected to the
Router.
LAN Settings Unit
Configuration
The LAN Settings unit configuration screen is used to specify the LAN IP
address of your Router, and to configure the DHCP server.
Figure 41 LAN Settings Unit Configuration Screen