Edimax Technology BR-6215SRg - Manual (Page 12)

11
Times to Select the period in which you wish to end daylight Savings Time
Click on NEXT to proceed to the next page (step 2) Broadband Type.
Step 2) Broadband Type
In this section you have to select one of four types of connections that you will be using to connect your broadband
router’s WAN port to your ISP (see screen below).
Note: Different ISP’s require different methods of connecting to the Internet, please check with your ISP as to the type of
connection it requires.
Menu Description
Cable Modem Your ISP will automatically give you an IP address
Fixed-IP xDSL Your ISP has given you an IP address already
PPPoE xDSL Your ISP requires you to use a Point-to-Point Protocol over Ethernet (PPPoE)
connection.
PPTP xDSL Your ISP requires you to use a Point-to-Point Tunneling Protocol (PPTP) connection.
L2TP xDSL Your ISP requires you to use a Layer Two Tunneling Protocol (L2TP) connection.
Telstra Big Pond This Protocol only used for Australia’s ISP connection.
Click on one of the WAN type and then proceed to the manual’s relevant sub-section (1.1, 1.2, 1.3, 1.4, 1.5 or 1.6). Click
on Back to return to the previous screen.
1.1 Cable Modem
Choose Cable Modem if your ISP will automatically give you an IP address. Some ISP’s may also require that you fill in
additional information such as Host Name and MAC address (see screen below).
Note: The Host Name and MAC address section is optional and you can skip this section if your ISP does not require
these settings for you to connect to the Internet.