Edimax Technology BR-6215SRg - Manual (Page 30)

29
2.4.1 Basic Settings
You can set parameters that are used for the wireless stations to connect to this router. The parameters include Mode,
ESSID, Channel Number and Associated Client.
Setting Page
Parameters Default Description
Mode AP It allows you to set the AP to AP, Bridge or WDS mode.
Band 2.4GHz(B+G)
It allows you to set the AP fix at 802.11b or 802.11g mode. You also can
select B+G mode to allow the AP select 802.11b and 802.11g
connection automatically.
ESSID default
This is the name of the wireless LAN. All the devices in the same
wireless LAN should have the same ESSID.
Channel Number 11
The channel used by the wireless LAN. All devices in the same wireless
LAN should use the same channel.
MAC address －
If you want to bridge more than one network together with wireless LAN,
you have to set this access point to “AP Bridge-Point to Point mode”,
“AP Bridge-Point to Multi-Point mode” or “AP Bridge-WDS mode”. You
have to enter the MAC addresses of other access points that join the
bridging work.
Set Security －
Click the “Set Security” button, and then a “WDS Security Settings” will
pop up. You can set the security parameters used to bridge access
points together here when your AP is in AP Bridge modes. You can
refer to section 4.3 “Security Settings” for how to set the parameters.
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance
sections or start using the router (with the advance settings in place)