Edimax Technology BR-6215SRg - Manual (Page 46)

45
Parameters Default Description
UPnP Feature Disable
You can Enable or Disable UPnP feature here. After you enable the
UPnP feature, all client systems that support UPnP, like Windows
XP, can discover this router automatically and access the Internet
through this router without any configuration. The NAT Traversal
function provided by UPnP can let applications that support UPnP
smoothly connect to Internet sites without any incompatibility problem
due to the NAPT port translation.
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance
sections or start using the router (with the advance settings in place)
2.6.5 ALG Settings
You can select applications that need “Application Layer Gateway” to support.
Parameters Default Description
Enable
You can select to enable “Application Layer Gateway”, and then the
router will let that application correctly pass though the NAT gateway.
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance
sections or start using the router (with the advance settings in place)
2.6.6 Static Routing
This router provides Static Routing function when NAT is disabled. With Static Routing, the router can forward packets
according to your routing rules. The IP sharing function will not work any more in Static Routing mode.
Note: The DMZ function of firewall will not work if static routing is enabled.