Edimax Technology BR-6215SRg - Manual (Page 49)

48
Parameters Description
Deny
If select “Deny” then all PCs will be allowed to access Internet accept for the PCs in the
list below.
Allow
If select “Allow” then all PCs will be denied to access Internet accept for the PCs in the
list below.
Filter client PCs by IP Fill “IP Filtering Table” to filter PC clients by IP.
Add PC You can click Add PC to add an access control rule for users by IP addresses.
Remove PC
If you want to remove some PC from the "IP Filtering Table", select the PC you want to
remove in the table and then click "Delete Selected". If you want remove all PCs from the
table, just click "Delete All" button.
Filter client PC by MAC
address
Check “Enable MAC Filtering” to enable MAC Filtering.
Add PC
Fill in “Client PC MAC Address” and “Comment” of the PC that is allowed to access the
Internet, and then click “Add”. If you find any typo before adding it and want to retype
again, just click "Reset" and the fields will be cleared.
Remove PC
If you want to remove some PC from the "MAC Filtering Table", select the PC you want to
remove in the table and then click "Delete Selected". If you want remove all PCs from the
table, just click "Delete All" button. If you want to clear the selection and re-select again,
just click “Reset”.
You can now configure other advance sections or start using the router (with the advance settings in place)