Edimax Technology BR-6215SRg - Manual (Page 50)

49
Parameters Description
Client PC Description The description for this client PC rule.
Client PC IP Addresses
Enter the IP address range that you wish to apply this Access Control rule. This is the
user’s IP address (es) that you wish to setup an Access Control rule.
Note: You need to give your LAN PC clients a fixed/static IP address for the Access
Control rule to work properly.
Client PC Service
You can block the clients from accessing some Internet services by checking the services
you want to block.
Protocol This allows you to select UDP, TCP or both protocol types you want to block.
Port Range
It can be assign up to five port ranges. The router will block clients from accessing
Internet services that use these ports.
Apply Changes Click “Apply Changes” to save the setting.
Reset Click “Reset” to clear all fields.
Click <Apply Changes> at the bottom of the screen to save the above configurations. You can now configure other
advance sections or start using the router (with the advance settings in place)
Example: Access Control
In the example below, LAN client A can only access websites that use Port 80. However, LAN client B is able to access
websites and any other service that uses ports between 80 and 999.
2.7.2 URL Blocking
You can block access to some Web sites from particular PCs by entering a full URL address or just keyword of the Web
site.