RIDGID micro CL-100 - Manual (Page 7)

micro CL-100 Self-Leveling Cross Line Laser
5
– Contact RIDGID Technical Services De part-
ment at rtctechservices@emer son.com, or
in the U.S. and Canada call (800) 519-3456.
Description, Specifications
and Standard Equipment
Description
The RIDGID micro CL-100 Self-Leveling Cross
Line Laser is professional electronic laser. It
utilizes two laser beams to plot horizontal
(level) and vertical (plumb) lines. It is primar-
ily for use indoors, but may be used outside
depending on light conditions.
The laser self-adjusts within a range of ±6°.
The laser beam will flash if it is outside of its
leveling range. The laser itself can swivel 360
degrees.
The laser has a locking mechanism built into
the ON/OFF switch to hold the internal com-
ponents in place to avoid damage during
transport and storage. The laser is powered
by three AAA Alkaline batteries.
The laser can be used with elevating tripod
to allow the laser line to be set to the re-
quired height.
Specifications
Interior Range............ Up to 100 ft (30 m)
depending upon Light
Conditions
Accuracy....................... ± 1 /
4
"/35 ft
(± 0.6 mm/m)
Self-Leveling
Range.......................... ± 6°
Laser
Classification.............. Class 2
Laser
Wavelength................ 630 nm – 670 nm
Maximum Power
Output.......................... ≤1 mW
Power Supply............. 3 × AAA Alkaline
Batteries
Battery Life.................. Approx. 12 hours
Continuous Use
Operating
Temperature............... 14°F to 113°F
(-10°C to 45°C)
Protection
Rating............................ IP 54
Standard Equipment
The RIDGID micro CL-100 Self-Leveling Cross
Line Laser includes the following items:
• micro CL-100 Self-Leveling Cross Line Laser
• 3 x “AAA” Alkaline Batteries
• Elevating Tripod
• Laser Viewing Glasses
• Carrying Case
• Operator’s Manual and CD
NOTICE This equipment is used to define
plumb and level references. Incorrect use
or improper application may result in non-
plumb or level references. Selection of ap-
propriate methods for the conditions is the
responsibility of the user.
Figure 1 - micro CL-100 Self-Leveling Cross
Line Laser
Dimension.................. 5" Ч 4" Ч 3 1 /
2
"
(127 mm × 101 mm ×
89 mm)
Weight......................... 1.2 lbs (0,54 kg)
Mounting Screw
Thread......................... 5 /
8
" - 11