STIEBEL ELTRON SHD ... S с 13.04.2009 - Manual (Page 26)

26 |SHD S www.Stiebel-eltron.CoM
inStallation | warranty | environMent anD reCyCling
SpeCifiCation
16.3 Specification
SHD 30 S SHD 100 S
073059 073060
Hydraulic data
Nominal capacity l 30 100
Amount of mixed water 40 °C (15 °C/60 °C) l 59 195
Electrical data
Connected load ~ 400 V kW 3.5/21 3.5/21
Rated voltage V 400 400
Phases 3/PE 3/PE
Frequency Hz 50 50
Single circuit operating mode X X
Dual circuit operating mode X X
Application limits
Temperature setting range °C 35-85 35-85
Max. permissible pressure MPa 0.6 0.6
Test pressure MPa 0.78 0.78
Max. permissible temperature °C 110 110
Max. flow rate l/min 18 18
Energy data
Standby energy consumption/24 h at 65 °C kWh 0.45 0.77
Versions
IP rating IP25 IP25
Sealed unvented type X X
Colour white white
Dimensions
Height mm 770 1050
Width mm 410 510
Depth mm 420 510
Weights
Weight, full kg 54.3 140.1
Weight, empty kg 24.3 40.1
16.3.1 Output tables
The heat-up time depends on the cylinder capacity, cold water
inlet temperature and appliance output. For the heat-up time with
the booster heater (21 kW) and a cold water supply of 10 °C, see
the following table.
Heat-up time (cylinder operation)
Temperature setting
°C 65 85
SHD 30 S min 6 8
SHD 100 S min 18 25
In instantaneous DHW cylinder operation, the following amounts
of hot water can be drawn off.
DHw output (instantaneous operation)
DHW temperature
°C 38 55
Cold water supply 6 °C l/min 9.4 6.1
Cold water supply 10 °C l/min 10.7 6.7
Cold water supply 14 °C l/min 12.7 7.3
Warranty
The warranty conditions of our German companies do not
apply to appliances acquired outside of Germany. In countries
where our subsidiaries sell our products, it is increasingly the
case that warranties can only be issued by those subsidiaries.
Such warranties are only granted if the subsidiary has issued
its own terms of warranty. No other warranty will be granted.
We shall not provide any warranty for appliances acquired in
countries where we have no subsidiary to sell our products.
This will not affect warranties issued by any importers.
Environment and recycling
We would ask you to help protect the environment. After use,
dispose of the various materials in accordance with national
regulations.
warranty
environMent anD reCyCling