Swarovski Optik EL Range - Manual (Page 14)

27
DE
26
DE EN EN
5.3. Brightness setting display (p1, p4)
In P1 – individual brightness setting – first select the appro-
priate display brightness level for you. there are 5 brightness
levels to choose from.
In P4, turn the automatic brightness adjustment on or off.
- on: the binocular automatically adjusts the display bright-
ness based on the brightness level you have chosen.
- off: the display is constantly illuminated at the brightness
level you have chosen.
5.4. angle program (p2)
For each distance measured, you can also display the angle
of the binoculars to the object under observation. this angu-
lar position means that the corrected shooting distance can
also be displayed.
Adjusting the measured angle
on the lower row of the display, you can show either:
• The angle
• Or no additional information
• Or the corrected shooting distance.
Display showing measured angle
Display not showing measured angle
Display showing corrected shooting
distance
SWaroaIm (corrected ballistic shooting distance)
When shooting at an angle (up or down), the force and effect
of gravity is less than with a horizontal shot. this results in a
flatter trajectory and a shifting of the point of impact.
For a detailed description, visit WWW.SWarovSkIoptIk.com.
5.5. Yard / metre setting (p3)
the binoculars can display the measured distance in yards or
metres. to switch between these two units briefly press the
measurement button on menu P3. the unit chosen here also
applies for the corrected ballistic shooting distance.
6. accessories
6.1. assembly instructions for objective lens cover
6.2. accessories
For detailed information about accessories, visit
WWW.SWarovSkIoptIk.com.