Multi-information display, 2010 insight – HONDA 2010 Insight User Manual
Page 114
Advertising
Press the SEL/RESET button to
enter the selecting mode.
Select the desired setting by
pressing the INFO (
/
) button,
then enter your selection by pressing
the SEL/RESET button.
When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to ‘‘DOOR
LOCK MODE’’ and repeat the
procedure again.
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
111
2010 Insight
Advertising
This manual is related to the following products: