HONDA 2010 Insight - Manual (Page 205)

Adjusts the bass.
Adjusts the front-to-back
strength of the sound. To adjust the
front/rear fader, touch the FR or RR
icon.
Adjusts the side-to-
side strength of the sound. To adjust
the left/right balance, touch the L or
R icon.
The right upper display shows you
the current setting of the sound
strength coming from each speaker.
The SVC mode
controls the volume based on vehicle
speed. The faster you go, the louder
the audio volume becomes. As you
slow down, the audio volume
decreases. Touch the appropriate
icon (Low, Mid, Hi, Off) to select the
mode.
This function is set to MID as the
default setting when the vehicle
leaves the factory. If you feel the
sound is too loud, choose low. If you
feel the sound is too quiet, choose Hi.
You can also select the icon with the
joystick. Move it up and down to
move the highlighting and scroll
through lists. Select the icon, then
enter the joystick.
The system will return to the audio
display about 10 seconds after you
stop adjusting a mode.
Adjusts the treble. To
adjust the treble and bass, touch
either
or on the treble or
bass adjustment bar. The adjustment
bar on the lower right display shows
you the current setting.
BASS
FADER
BALANCE
SVC (speed-sensitive volume
compensation)
TREBLE
Playing the AM/FM Radio (Models with navigation system)
202
SPEAKER SETTING
BASS/TREBLE SETTING
2010 Insight