Wiper blades, 2010 insight – HONDA 2010 Insight User Manual
Page 374
Advertising
To replace a wiper blade:
Raise each wiper arm off the
windshield, lifting the driver’s side
first, then the passenger’s side.
Disconnect the blade assembly
from the wiper arm:
When replacing a wiper blade,
make sure not to drop the wiper
blade or wiper arm down on the
windshield.
Put a cloth on the edge of the
lock tab, then push up on the
lock tab carefully with a flat-
tipped screwdriver.
Pivot the blade assembly toward
the wiper arm until it releases
from the wiper arm.
1.
2.
CONTINUED
Wiper Blades
Ma
int
e
na
nce
371
WIPER ARMS
LOCK TAB
WIPER ARM
Do not open the hood when the wiper
arms are raised, or you will damage the
hood and wiper arms.
2010 Insight
Advertising
This manual is related to the following products: