HONDA 2010 Insight - Manual (Page 376)

Slide the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
Make sure the blade is completely
installed and that its edge is not
bunched up.
Lower the wiper arm down against
the windshield, the passenger’s
side first, then the driver’s side.
To replace a rear wiper blade:
Raise the wiper arm off the rear
window.
Disconnect the blade assembly
from the wiper arm by pivoting the
blade assembly upward.
6.
7.
8.
1.
2.
CONTINUED
Wiper Blades
Ma
int
e
na
nce
373
REAR
2010 Insight