HONDA 2010 Insight - Manual (Page 137)

Remove the screw at the base of
the transmitter with a small
Phillips-head screwdriver.
Be careful when removing
this screw as the head of the screw
can strip out.
Separate the transmitter by prying
its middle seam with your
fingernail.
Inside the transmitter, separate
the inner cover from the keypad
by carefully prying on the edge
with a coin. Remove the old battery and note
the polarity. Make sure the
polarity of the new battery is the
same (
side facing down), then
insert it in the keypad.
1.
2.
3. 4.
Remote Transmitter
134
NOTE:
SCREW
BATTERY
COIN
2010 Insight