Multi-information display, 2010 odyssey – HONDA 2010 Odyssey User Manual

Page 130

Advertising
background image

Each time you press the INFO
button, the display changes to ‘‘ON,’’
to ‘‘OFF,’’ then to ‘‘EXIT.’’

Select ‘‘ON’’ or ‘‘OFF’’ by pressing
the INFO button, and enter your
selection by pressing the SEL/
RESET button.

When you press the UNLOCK
button on the remote transmitter to
unlock the doors and the tailgate, the
exterior lights blink twice to verify
that the doors and the tailgate are
unlocked and the security system is
turned off.

When you push the LOCK button on
the remote transmitter, some
exterior lights flash, and a beeper
sounds when you push the LOCK
button again within 5 seconds to
verify that the doors and the tailgate
are locked and the security system
has set (see page

). You can

customize the exterior lights not to
flash and the beeper not to sound.

While the multi-information display
shows ‘‘DOOR·WINDOW SETUP,’’
press the SEL/RESET button on the
steering wheel. Then press the
INFO button repeatedly until you see
‘‘KEYLESS LOCK
ACKNOWLEDGEMENT’’ as shown
above.

Press the SEL/RESET button. The
display changes as shown above.

318

CONTINUED

Keyless Lock Acknowledgement

Multi-Information Display

Inst

ru

m

e

nt
s

a

nd

Cont

ro

ls

127

2010 Odyssey

Advertising
This manual is related to the following products: