HONDA 2010 Odyssey - Manual (Page 451)

Pull one end of the blade out from
the holder.
Slide the blade out of the holder. To replace a rear wiper blade:
Disconnect the blade assembly
from the wiper arm by pivoting the
blade assembly upward.
Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
1.
2. 3.
Wiper Blades
448
BLADE
REINFORCEMENT
2010 Odyssey