HONDA 2010 Odyssey - Manual (Page 471)

Install the bracket and the bracket
mounting wing bolt on the
attachment point as shown, and
tighten the bolt. Make sure the
bracket is securely tightened.
Install the flat tire on the bracket
with the inside of the wheel facing
toward you. Install the tire
mounting wing bolt to the bracket
through one of the five wheel nut
holes as shown. Poke a hole in the
vinyl bag as needed. Secure the
flat tire by tightening the tire
mounting wing bolt.
Return the third row seat to an
upright position.
You will find a U-shaped carpet
piece behind the seat bottom of
the third row seat. Pull up the U-
shaped carpet piece, fold it, and
tack the end under the carpet.
Remove the spacer, and unfasten
the plastic screw with a coin.
20.
21.
22.
23.
Changing a Flat Tire
468
BRACKET
TIRE MOUNTING WING BOLT SPACER
PLASTIC SCREW
BRACKET MOUNTING WING BOLT
ATTACHMENT
POINT
2010 Odyssey