HONDA 2010 Odyssey - Manual (Page 54)

With the child seat in the desired
seating position, route the belt
through the child seat according
to the seat maker’s instructions,
then insert the latch plate into the
buckle and remove any slack from
the lap portion of the belt.
When not using the LATCH system,
all child seats must be secured to the
vehicle with the lap part of a lap/
shoulder belt.
In addition, the lap/shoulder belts in
all seating positions except the
driver’s have a lockable retractor
that must be activated to secure a
child seat.
If you intend to install a child seat in
the center seating position of the
third row, make sure the detachable
seat belt is properly installed (see
page
).
Remove the head restraint (see
page
). Make sure the
removed head restraint is secured
in the cargo area. Reinstall the
head restraint when the child seat
is removed.
Follow steps 6 and 7 on page .
1. 4.
5. 49
16
172
CONTINUED
Installing a Child Seat
Installing a Child Seat with a Lap/
Shoulder Belt
Dr
iv
er
and
P
asseng
er
Saf
e
ty
51
TETHER STRAP
HOOK
ANCHOR
2010 Odyssey