Installing a child seat – HONDA 2010 Odyssey User Manual

Page 51

Advertising
background image

Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.

The lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.

The location of each lower anchor is
indicated by a small button above the
anchor point.

Some LATCH-compatible seats
have a rigid-type connector as
shown above.

To install a LATCH-compatible child
seat in a second row seat:

Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.

Move the seat belt buckle or
tongue away from the lower
anchors.

Your vehicle is equipped with
LATCH (Lower Anchors and
Tethers for CHildren) in the two
second row seats and the center
seating position of the third row.

1.

2.

3.

Installing a Child Seat with
LATCH

Installing a Child Seat

48

LOWER
ANCHORS

BUTTON

Rigid type

2010 Odyssey

Advertising
This manual is related to the following products: