HONDA 2013 Insight - Manual (Page 169)

To remove fog from the inside of the
windows, set as follows:
Use the mode control button to
select the vents the air flows from.
Some air will flow from the
dashboard vents in all modes.
Airflow is divided between
the floor and corner vents and the
defroster vents at the base of the
windshield.
This button directs the main airflow
to the windshield for faster
defrosting. It also overrides any
mode selection you may have made.
Select . The system
automatically switches to fresh air
mode and turns on the A/C.
Adjust the temperature so the
airflow feels warm.
Select to help clear the
rear window.
To increase airflow to the
windshield, close the corner vents.
For faster defogging, manually set
the fan speed to high.
For your safety, make sure you have
a clear view through all the windows
before driving.
When you select , the system
automatically switches to fresh air
mode and turns on the A/C. For
faster defrosting, manually set the
fan speed to high. You can also
increase airflow to the windshield
by closing the corner vents on
the dashboard.
When you turn off by
pressing the button again, the
system returns to its former settings.
Air flows from the floor
vents.
Airflow is divided between
the vents in the dashboard and the
floor vents.
Air flows from the center
and corner vents in the dashboard.
1.
2.
3.
4.
Climate Control System
Mode Control Windshield Def roster Button
166
12/07/13 16:57:47 31TM8630_171
Fe
a
tu
re
s
TOC
2013 Insight